Flat 100% acrylic emulsion paint for exterior use. It can be used to paint walls, plasters, concrete and gypsum board.
VINYL Acrylic has excellent adhesion and elasticity. The durability against UV radiation and difficult weather conditions is excellent as on to alkali surfaces. Easy to apply with very good leveling, covering power. Excellent whiteness and long lasting bright colors.
Texture : Mat with sheen up to 8-12 units at 85°.
Specific gravity : 1,44– 1,46 kg/lt.
Covering power : 11-13 m²/lt per layer depending on the surface.
Dilution : 8-15% on volume with water.
VOC class : “Exterior wall coatings of mineral substrate”. Type WB. VOC limit = 40gr/lt. Max VOC of product ready for use = 20gr/lt. It fulfills the requirements of E.C. legislation after 2011. VOC: organic volatile compounds with boiling point < 250°C.
Drying : ½ -1 hour touch free.
Recoatability : Recoatable 4-6 hours after first layer’ s application. These times prolong under cold and wet weather conditions.
Color shades: : White.
PACKING: 3lt & 10lt.
APPLICATION EQUIPMENT: Brush, roller and Airless spray.
Clean the surface of dust, oil, cropped old paints, dumpness etc. Sandpaper well and prime with SMALTODUR SILICONE or SMALTODUR primer. For difficult and dirty surfaces (such as nicotine, smoke, dampness) prime with special primer SMALTOX mono.
Stir well. Apply one or two coats VINYL acrylic.
While working keep your equipment wet, either in the pot or in the paint launder. Strain well your tools from paint back to the pot and clean immediately with water and soap.
Temperature 8°-30°C and relative humidity lower than 80%. Contrary weather conditions may degrade paint’s quality. New cementinous surfaces should be dried and cured 30-40 days before priming.
Close well after use. Store in a cool place. Protect from freezing and sun exposure.
• Keep out of the reach of children.
VINYL acrylic needs no danger symbols according to EC legislation.